Mostrando 169–180 de 183 resultados
The MARSH FUNNEL is an instrument used to measure drilling fluid viscosity, commonly used with the AMC MEASURING CUP. The MARSH FUNNEL is molded from a tough, durable plastic that resists breaking or cracking. A brass orifice assures consistency in all readings.
MICA (F, M, C) is an all-purpose lost circulation material and is available in three grades; fine, medium or coarse. It is designed to reduce severe lost circulation and also minor seepage losses. It is applicable in both water-based and oil-based drilling fluids.
pH PAPERS (PAPEL PH) measure the acidity or alkalinity of drilling fluids.
PORTLAND CEMENT is a low temperature Sulfate Resisting Cement Type SR, with many applications and capable of setting, hardening and remaining stable in accordance to Australian Standard “AS 3972 – 2010”.
POTASSIUM ACETATE is a chloride free alternative source of potassium ions to commonly used potassium chloride (KCl). POTASSIUM ACETATE is being used in water based drilling fluids where potassium chloride cannot be used due to environmental restrictions. POTASSIUM ACETATE is a non-corrosive inhibitor which is a commonly used alternative to other brines such as sodium, potassium and calcium chloride.
POTASSIUM CHLORIDE (KCl) is a soluble salt that is an extremely efficient shale stabiliser when drilling hydro sensitive clays and shales. Inhibition is provided through ion exchange; the potassium ion enters between the individual clay platelets in the shale so that they are held together, thus eliminating entry of water from the drilling fluid.
POTASSIUM SULPHATE (K2SO4) is a water soluble salt that is an extremely efficient shale stabiliser when drilling hydro sensitive clays and shales. Inhibition is produced through exchange; the potassium ion enters between the individual clay platelets in the shale so that they are held together, thus eliminating entry of water from the drilling fluid.
The SAND CONTENT KIT is a simple and accurate sieve analysis tool used to determine the sand content of drilling fluids.
SAPP (sodium acid pyrophosphate) is a commercial chemical used as a thinner and dispersant in fresh water drilling fluids. It is a water soluble, easily dispersed solid and requires only small concentrations to provide effective thinning results.
SODA ASH is a free flowing powder also known as sodium carbonate (Na2CO3) used in a fluid system to precipitate calcium (hardness) and increase alkalinity (pH).
SODIUM BICARBONATE, commonly referred to as Bicarb, is used in water based fluids as a source of bicarbonate ions. Bicarbonate ions precipitate calcium and reduce pH. SODIUM BICARBONATE is principally used to treat cement contamination.